A heavy plate hung on the wall is a great way to show off decorations and give a room more personality. But you should make sure the plate is safely hung so it doesn’t fall and break anything. Hanging a big plate can be done in a number of ways, and each has its own pros and cons.
Picking the right way to hang your plate on the wall can be very important for making sure it stays in place.
In this comparison, we’ll talk about the Molly bolt and screw method, the French cleat method, and the plate wire hanger with screws method as ways to hang big plates on walls. It will depend on the case as to which method is best. We will compare how much each method costs and how well it works.
How to Hang a Heavy Plate on the Wall for Decoration?
- Molly bolts and screws: like you said, molly bolts can work well to hang big plates on the wall. These are special pegs that get bigger when a screw is put in, holding the wall securely. First, you have to make a hole in the wall. Then, put the molly bolt in the hole and screw it in place. It’s best to use this method when hanging plates on drywall or other walls that might not be strong enough to hold the weight of a big plate on their own.
- Cleats in French: You can hang heavy plates or other decorating items from French cleats, which are strong and flexible. They have two parts: one that goes on the wall and one that goes on the back of the plate or other thing you want to hang. The plate is firmly held in place by the two pieces that fit together. Because you don’t have to drill holes in the wall, this method is great for big plates.
- Screws and a plate wire hanger: For this method, you screw a plate wire hanger to the back of the plate and then hang it on the wall. The wire hanger holds the plate up and spreads the weight out evenly. You can use the plate wire hanger to hang the plate firmly and remove it without leaving any marks on the wall or plate. This is a good choice if you want to put the plate on a delicate surface or move it to a different spot.
Please remember that any of these options might not work in every situation, based on the weight and material of the plate, wall, and other things. It’s important to use the right hardware and talk to a professional if you’re not sure.
Molly Bolts and Screws
People often use the Molly bolt and screw method to hang big things on walls, like plates. Molly bolts are a kind of hollow-wall anchor that can be used in drywall or other materials that can’t hold a big object by themselves. After the molly bolt is put into the drywall, a screw is put in to make the back of the anchor bigger. This makes a strong hold in the wall.
To hang a big plate on the wall with Molly bolts and screws, follow these steps:
- Get the tools you need: A drill, a molly bolt, a screwdriver, and a pencil or pen are what you’ll need.
- Mark the spot where the plate is: Mark the spot on the wall where you want to hang the plate with a pencil or pen.
- Make a hole: Use the drill to make a hole in the wall where you marked it. Make sure the hole is at least a little bigger than the molly bolt.
- Put the molly bolt in place: Making sure the bolt is flush against the wall, push it into the hole you made.
- Put the screw in: Put the screw into the molly bolt with the screwdriver. The back of the molly bolt will grow as you turn the screw clockwise, making a strong hold in the wall.
- Put the plate on: You can now hang your plate from the screw after tightening it.
The Molly bolt and screw method is an easy and effective way to hang big plates or other decorative items on the wall. However, you should always check the anchor’s weight limit and the wall’s strength before you use it. Also, make sure you use the right tools and talk to a professional if you’re not sure.
French Cleats
With the French cleat method, you can hang heavy things on walls in a number of different ways. French cleats are a two-part hanging system. One piece goes on the back of the plate or other item you want to hang, and the other piece goes on the wall. The plate is firmly held in place by the two pieces that fit together.
Here’s a step-by-step guide for using French cleats to hang a heavy plate on the wall:
- Gather the necessary tools: A tape measure or ruler, a screwdriver or drill bits, a level, a pencil or pen, and a saw are some of the things you’ll need.
- Measure and mark the location of the plate: Find out how big your plate is with the measuring tape or marker, and then mark the wall where you want to hang it. Make sure the line is straight with the level.
- Cut the French cleat: Cut the French cleat to the right size for the plate with the saw. Cut two cleats: one for the wall and one for the plate.
- Drill pilot holes: Start by drilling a small hole in the corner of each cleat with the drill and drill bit.
- Install the cleat on the wall: Hold the cleat that is attached to the wall in place and line it up with the marks you made in step 2. You can use the screwdriver or drill to connect the test holes in the cleat to the wall.
- Install the cleat on the plate: It’s the same way to put the plate’s cleat on the back of the plate.
- Hang the plate: Then, line up the plate and cleat and gently press the plate onto the cleat. The plate will stay in place because the two cleats will connect.
With this method, you don’t have to make holes in the wall, and it’s also easy to take down without leaving any marks. Make sure you use the right tools, and if you’re not sure, ask a professional.
Plate Wire Hanger With Screws
It’s easy and works well to hang a plate on the wall with a plate wire hook and screws. For this method, you put a plate wire hanger on the back of the plate and then use screws to hang it on the wall.
The wire hanger supports the plate and spreads the weight out evenly, so you can hang it safely on the wall without hurting the plate or the wall.
Here’s a step-by-step guide for using a plate wire hanger with screws to hang a plate on the wall:
- Get the tools you need: A screwdriver or drill, screws, a level, a pencil or pen, and a measure tape or ruler are the things you’ll need.
- Find where the plate will go and mark it: Find out how big your plate is with the measuring tape or marker, and then mark the wall where you want to hang it. Make sure the line is straight with the level.
- Put the plate wire hanger on the back of the plate like this: Follow the wire hanger’s instructions for how to connect the hanger to the back of the plate with a screwdriver or drill. Check to see that it is attached firmly to the plate.
- Put the screws in the wall: Place the screws on the wall using the screwdriver or drill, making sure they line up with the marks you made in step 2.
- Hang the plate: Once the screws are in place, use them to hang the plate. The plate will stay on the wall with the help of the wire clip.
No more work for you. Setting up a plate on the wall with a plate wire hanger and screws is a quick and easy method that won’t harm the plate or the wall.
If you want to move the plate to a different spot, this method works great because you can take it off without damaging the wall or plate. Make sure you use the right tools, and if you’re not sure, ask a professional.
A Look At Each Method Side by Side
Putting a big plate on the wall is a cool way to show off decorations and give a room more personality. However, it can be tricky because you have to make sure the plate is properly hung so it doesn’t fall and break anything.
The French cleat method, the plate wire hanger with screws method, and the Molly bolt and screw method are some of the ways to hang a big plate.
There are pros and cons to each way, and each will work best in certain situations based on the wall’s weight and material, as well as other factors. This review will talk about the pros and cons of each method, as well as how much they cost and how well they work.
Cost
- A heavy plate can be hung with the Molly bolt and screw method, which doesn’t cost too much. The molly nuts and screws are usually cheap and easy to find at major hardware stores.
- The French cleat method costs a little more because you have to buy or cut a special cleat and screws. But the cost is still easy to handle.
- You can also use a plate wire hanger and screws, which is a pretty cheap way since wire hangers and screws are easy to find at any hardware store.
Effectiveness
- Heavy plates can be hung on walls with the Molly bolt and screw method because it gives the plates a strong hold on the wall. But you have to drill a hole in the wall for this method to work, and it might not work for all wall types or materials.
- The French cleat method is also a great way to hang heavy plates because it evenly spreads the weight and makes it easy to make changes. For this method, you don’t have to make holes in the wall.
- Another good way to hang a plate is with a plate wire hanger and screws. The wire hanger supports the plate and spreads the weight out evenly. But, just like the Molly bolt method, you have to drill a hole in the wall for this one.
Which way works better? In each case, the best way to do things will depend on things like the wall’s state, the plate’s weight and material, and so on.
- If your wall is made of drywall or something else that might not be strong enough to hold a big plate, the Molly bolt and screw method is a good choice.
- For heavy plates, the French cleat method works well because you don’t have to drill holes in the wall and it’s easy to take off without leaving any marks.
- If you want to put the plate on a delicate surface or move it to a different spot, the plate wire hanger with screws is a good choice. The plate wire hanger will help the plate hang securely, and it can be taken off without leaving any marks on the wall or plate.
- All of these ways are safe ways to hang a big plate, and each has its own benefits that make it good for different walls and situations.
When picking a method, you should carefully think about the plate’s weight and material, the wall’s state, and other things. You should also use the right tools and talk to a professional if you’re not sure what to do.
Comparison Table Between the Methods
| Method | Cost | Effectiveness | Ease of use | Damage to wall |
| Molly bolt and screw method | Low | High | Medium | Moderate |
| French cleat method | Medium | High | High | Low |
| Plate wire hanger with screws method | Low | High | Medium | Moderate |
- It doesn’t cost much and gives you a strong hold on the wall with the Molly bolt and screw method. There are some problems with how easy it is to use, and if it’s not put up right, it can do some damage to the wall.
- There is a slight price difference between the French cleat method and the others, but it is the best at keeping the plate in place. It is very easy to use, and since you don’t have to drill holes in the wall, it doesn’t hurt it.
- The plate wire hanger with screws method is also not too expensive and does a good job of supporting the plate. The level of difficulty is average, and it can do average damage to the wall if not put up properly.
It’s important to remember that this table is just a rough guide. The price, usefulness, and simplicity of these methods may be different for you, based on the plate and wall’s weight and material, among other things. It’s also important to use the right tools and get help from a professional if you’re not sure what to do.